The laser of the fiber laser marking machine uses a 1064nm fiber generator. The marking machine has fast speed, high precision and strong stability. The life of the whole machine is as high as more than 100,000 hours. The laser power is 10w/20w/30w/50w for laser radium engraving Choose, high power 500W/1000W/2500W etc. for laser cutting field. The assembly of fiber laser marking machine is commonplace for a professional laser equipment manufacturer. Mistakes in details may cause the processing quality and product effect of the laser marking machine. The main points for attention in assembling the fiber laser marking machine are as follows: 1. The main structure of the fiber laser marking machine includes a cabinet, an optical path, an industrial computer, a laser, a vibrating mirror, a field mirror, a power supply, and a board. These accessories are integrated into the cabinet Inside, first of all, the appearance and wiring should be neat and orderly, and secondly, the power supply, the layout of the board and card should be reasonable, the screws should be fastened, and the installation should be stable.
2. For electricity safety issues, check that all wires have no leakage, leakage, short circuit and other hidden problems, and reserve a ground wire to prevent static electricity and electric shock. 3. The most important dimming calibration after the assembly is completed. After the power is turned on, the laser projection should show the brightest dot on the dimming film. At this time, the installation is correct. The purpose of the calibration is to make the size of the laser marking process It is consistent with the size of the marking content on the software to improve accuracy. Correct Pack has been established for more than ten years and has a technical team with rich technical experience. Welcome to visit the factory.