Author: Correct Pack -Laser Marking Machine Manufacturer
Fiber laser marking machines are more and more widely used. After users use the laser marking machine, they need to maintain it. Many users may have questions about how to maintain the fiber laser marking machine. The following will talk to users Share some equipment maintenance knowledge to help users better use laser marking machines. 1. Regularly clean F-θFor the protective glass of the lens, wipe it in one direction with a clean cloth dipped in a small amount of alcohol every day. 2. Regularly check the operation status of the fans, and replace the fans that are not operating normally.
3. Regularly clean the mouse and keyboard. 4. Regularly clean the dust on the laser fan and air duct. When the equipment is powered off, use an air gun to clean along the direction of the air duct every week. 5. Before starting the machine every day, carefully check the pressure of the auxiliary gas. If the gas pressure is not enough, check whether there is any leakage in the pipeline.
6. Check whether the buttons are damaged, and check whether the indicator lights are normal. 7. Before processing, check that the lens of the focusing mirror is not damaged by the laser marking machine. 8. Before processing, check whether the position of the lifting mechanism is offset.
9. Before processing, check whether the software parameter settings have changed. 10. After the daily work is completed, shut down according to the shutdown procedure, and then turn off the main power supply. Be cautious when purchasing laser marking machines.
1. It is very important to buy products produced by regular manufacturers. At present, there are some big brand marking machines. Although the price is more expensive, the quality is guaranteed. Although the price of some small manufacturers is low, the quality There is no guarantee, and the lack of after-sales guarantee is a big problem for later use. 2. Quality identification, quality identification is actually very important, this is the basis for customers to buy, do not blindly compare prices when purchasing, the most important thing is to compare quality, it is best to find a professional person for quality identification Make a comparison, so that you can have a good contrast effect. 3. Take a look at the product trademarks. Some products are directly sold by the manufacturers as their own trademarks of the UV laser marking machine, so the price is more reasonable, but some customers do not have the support of the manufacturer when selling, but Cooperate with manufacturers to paste their own trademarks later, so the price is not particularly reasonable, and the after-sales service is not very good.
With the development of laser technology and the price reduction of the main components of laser marking machines, laser marking machines are no longer superior products, and laser marking machines are widely used in various industries. But in the process of use, many customers have encountered such problems. It was used well yesterday. Why can’t you mark or engrave when you turn it on today? Let’s check your laser marking machine from several aspects. If there is no problem with the software after the investigation, please contact the laser marking machine manufacturer to check whether the hardware is damaged. Now most of the market is fiber laser marking machines, especially the newly bought machines in the past two years. Everyone knows that fiber laser marking machines are very durable, and IC automatic laser marking machines generally do not have problems. If your fiber laser marking machine suddenly fails to mark, please check the problem in the following order, open the marking software, and pay attention to whether there is an error prompt when the software is opened, such as the dongle cannot be found or the LMC cannot be opened... , when these two prompts appear, please reinstall the dongle driver and the control card driver. If the problem still cannot be solved, the control card may be faulty. Contact the manufacturer to replace the control card.
If the software is opened normally, click the parameter (shortcut key F3) after entering, and find the laser control in the pop-up window——Select FIBER in the laser type (note: if you are using a fiber end-pumped laser, please select CO2), select YAG for semiconductor equipment, select CO2 for carbon dioxide equipment, select the corresponding selection, click OK after completion, and perform trial marking. It can be said that the problem can be solved. If it still can't be solved, please contact the laser marking machine manufacturer for on-site maintenance in time. Zhuhai Correct Pack is a well-known laser equipment manufacturer in China. It has been focusing on the development and production of laser equipment for 12 years, providing customers with a complete set of laser equipment solutions, and creating cost-effective laser equipment. Main business: UV, co2, fiber laser marking machines, laser radium engraving machines And other cost-effective laser equipment, national service hotline: 400-0098-266https://www.xmslaser.com/.