The characteristics and cleaning and maintenance of laser marking machine

Author: Correct Pack -Laser Marking Machine Manufacturer

With the development of the times, the types and types of things are also very different, so it is particularly important to have a code or name. At this time, we will try to use tools to put the name code on things. For example, there are many types of cars. In traffic accidents, you can’t find troubles one by one. You have to prescribe targeted drugs. This is the strong medicine, so we use the marking machine to mark the identification number. Speaking of which, today we will learn about the fiber laser marking machine equipment. feature it. Fiber laser marking machine equipment features:. 1. It can process a variety of metal and non-metal materials, especially for marking high hardness, high melting point and brittle materials.

2. It belongs to non-contact processing, no damage to products, no tool wear, and good marking quality. 3. The laser beam is thin, the consumption of processing materials is small, and the processing heat-affected zone is small. 4. High processing efficiency, computer control, easy to realize automation.

Fiber laser marking machine is suitable for laser marking machine for integrated circuit chips, computer accessories, industrial bearings, watches, electronics and communication products, aerospace components, various auto parts, home appliances, hardware tools, molds, wires and cables, food packaging , Jewelry, tobacco and military and many other areas of graphic and text marking, as well as mass production line operations. 1. Replacement of laser marking machine water and cleaning of the water tank: clean the water tank of the laser marking machine and replace the circulating water once a week, but make sure that the laser tube of the laser marking machine is full of circulating water before working. The water quality and water temperature of the circulating water of the standard machine directly affect the service life of the laser tube. It is recommended to use pure water and keep the water temperature below 32°C. It is very important to clean the water tank of the marking machine regularly. 2. Cleaning of the fan of the laser marking machine: the fan has been used for a long time, and the ultraviolet laser marking opportunity will accumulate a lot of impurities and dust in the fan, which will make the fan generate a lot of noise, which is not conducive to exhaust and deodorization. Laser marking machine If the suction power of the fan is insufficient and the smoke exhaust is not smooth, please turn off the power, remove the air inlet pipe and outlet pipe on the fan, remove the dust inside, turn the fan upside down, and pull the fan blades inside until it is clean, and finally Then install the fan.

3. Cleaning of the laser marking machine lens: When the laser marking machine is turned off, clean it before working every day. The laser marking machine lens is easy to be stained with dust or other pollutants, resulting in loss of laser or lens damage. Cleaning The lens of the laser marking machine needs to be removed, and the lens cleaning paper dipped in cleaning fluid is carefully wiped along the center of the lens to the edge. It is worth noting that you should handle it gently when wiping the lens of the laser marking machine. Wipe gently, and make sure to keep the concave side down when the focusing lens is installed. 1.CO2 laser marking machine, can engrave a variety of non-metallic materials, used in clothing accessories, medicine packaging, architectural ceramics, beverage packaging, fabric cutting, rubber products, shell nameplates, craft gifts, Electronic components, leather and other industries. 2. YAG metal laser marking machine, the application industry is especially suitable for meeting the needs of high-precision processing, used in electronic components, hardware products, tool accessories, integrated circuits (IC), electrical appliances, mobile communications, precision instruments, glasses clocks, Jewelry, auto parts, plastic buttons, building materials, PVC pipes, medical equipment and other industries.

3. Semiconductor laser marking machine (i.e. side pump laser marking machine and end pump laser marking machine), used for mold engraving, hardware product engraving, various plastic buttons, mechanical products, electronic components, hardware tools, various decorations, etc. lettering. 4. Fiber laser marking machine, applicable materials: any metal (including rare metals), engineering plastics, electroplating materials, coating materials, spraying materials, plastic rubber, epoxy resin, ceramics, and other materials. Zhuhai Correct Pack is a well-known laser equipment manufacturer in China. It has been focusing on the development and production of laser equipment for 12 years, providing customers with a complete set of laser equipment solutions, and creating cost-effective laser equipment. Main business: UV, co2, fiber laser marking machines, laser radium engraving machines And other cost-effective laser equipment, national service hotline: 400-0098-266https://www.xmslaser.com/.