Parts and technical analysis of laser marking machine

Author: Correct Pack -Laser Marking Machine Manufacturer

The three major components of fiber laser marking machine:. 1. The laser power supply of the laser marking machine: The laser power supply of the fiber laser marking machine is a device that provides power for the fiber laser. The input voltage of the laser power supply of the laser marking machine is AC220V, and it is installed in the control box of the laser marking machine. 2: The fiber laser of the laser marking machine: The fiber laser marking machine adopts imported pulsed fiber laser. The fiber laser output laser mode of the laser marking machine has a long service life and is designed to be installed in the casing of the laser marking machine.

3. The galvanometer scanning system of the laser marking machine: the galvanometer scanning system is composed of two parts: an optical scanner and a servo control. The entire system of the laser marking machine adopts new technologies, new materials, new processes, and new working principles. Manufacturing, the optical scanner of the laser marking machine adopts the servo motor of the moving magnet deflection working mode, which has the advantages of large scanning angle, large peak torque, large load inertia, small electromechanical time constant, fast working speed, stable and reliable, etc., precision bearings The anti-backlash mechanism provides super-bottom axial and radial runout errors, and the galvanometer scanning system of the laser marking machine“Electronic Torque Bar”It replaces the traditional elastic material torsion bar, which greatly improves the service life of the laser marking machine and the reliability of long-term work. The working principle of zero power at any position not only reduces the power consumption, but also reduces the heating effect of the device. The constant temperature device is omitted, and the laser's advanced high-stability precision position detection sensor technology provides high linearity, high resolution, high repeatability, and low drift performance. 1. Using laser as the processing method, there is no processing force between the workpiece and the advantages of no contact, no cutting force, and small thermal influence, which ensures the original precision of the workpiece. At the same time, it has wide adaptability to materials and can be used in The surface of various materials produces very fine markings and is very durable. 2. The space control and time control of the laser are very good, and the freedom of the material, shape, size and processing environment of the processing object is very large. It is especially suitable for automatic processing and special surface processing, and the processing method is flexible, which can be adapted to the experiment. It can meet the needs of chamber-style single-item design, and can also meet the requirements of industrial mass production.

3. The laser marking is fine, and the lines can reach the order of millimeters to microns. It is very difficult to imitate and change the marks made by laser marking technology, which is extremely important for product anti-counterfeiting. Ultraviolet laser marking machine 4. The combination of laser processing system and computer numerical control technology can form an efficient automatic processing equipment, which can print various characters, symbols and patterns, and it is easy to use software to design marking patterns, change marking content, and adapt to the requirements of modern production with high efficiency and fast pace. 5. Laser processing has no source of pollution, and is a clean and pollution-free high-environmental processing technology.

1. First you have to make a decision, when you engrave the material with the fiber laser marking machine in the market the maximum size, the bigger the size, the more expensive the system is, because it always fails to realize your design is very frustrating, because Objects that are too large for your machine should invest in the largest size that will be used regularly. 2. The next decision is you need to determine how fast the system speed is, the speed of the fiber laser marking machine is directly proportional to the laser power, if you have to do many engravings at the same time, it may be worth the extra money to get Faster fiber laser marking machines, on the other hand, if you can only do one or two pieces at a time, they can wait for the process, cheaper systems may be more suitable, finally, you should consider if you are also interested In cutting materials, a more powerful laser can cut more materials. 3. Servo motor or high precision motor and laser strengthening option, if you need fine detail etching, if you are using very fine engraving of small objects, better motors give computer more precise control during etching process, beam strengthening The optical system makes the laser beam precise, and the auto-focus function enables the laser to adjust its focus on curved or irregular surfaces.

At present, the price of fiber laser marking machine is relatively lower than domestic ones, but imported ones are still much more expensive than domestic ones. 4. Many engraving systems have indicator lights to show exactly where the laser is pointing, which is very useful during the engraving process because it allows you to watch the laser cut and make sure the result is what you expected, which is what makes most laser engravers A very common feature of machines, but it is not always available on older models. 5. Consider if you need an air supply system, it puffs cool air throughout the laser cutting of the material, during etching, the process removes debris and fumes, this is standard on many systems, but not all, but , it is a critical safety feature when cutting things like acrylic or other flammable materials.

Zhuhai Correct Pack is a well-known laser equipment manufacturer in China. It has been focusing on the development and production of laser equipment for 12 years, providing customers with a complete set of laser equipment solutions, and creating cost-effective laser equipment. Main business: UV, co2, fiber laser marking machines, laser radium engraving machines And other cost-effective laser equipment, national service hotline: 400-0098-266https://www.xmslaser.com/.