It is expected that the switching sequence of the discount machine, because the structure of the old laser marking machine is relatively complicated, so the switching sequence has a great influence, and now the fiber laser marking machine and some other types of laser marking machines can also be said to be the switching sequence It is relatively random and will not cause too much impact on the machine, but following the normal switching sequence will also bring a good operating effect to the machine, and it is not easy to cause unnecessary damage. Let's analyze the switching sequence of the laser marking machine for you. Start-up process: 1. First insert the aviation plug power supply, push up the air switch, and power on the whole laser marking machine. 2. Connect to the laser marking machine in turn. Turn on the power of the laser, the power of the vibrating lens, and the power of the control card. 3. Then turn on the industrial control computer, wait for the laser marking machine to run smoothly and the industrial control computer to finish running, and then click the laser marking machine software on the desktop. 4. Remove the laser shock lens cover. Shutdown process: 1. Shut down the laser marking software, so that the software is in the exit state. 2. Exit the power supply of the laser marking machine in sequence, first turn off the power of the laser, then turn off the power of the vibrating lens, and then turn off the power of the control card. 3. Shut down the industrial computer. 4. Cover the protective cover of the vibrating lens. 5. Push down the air switch of the machine and unplug the power of the laser marking machine. The switching sequence of the laser marking machine introduced above, using the correct switching sequence can greatly prolong the service life of the machine, and the details of peacetime maintenance should also be paid attention to, try not to let the machine work in a low temperature environment, or in the dust Work in a relatively large environment, or work in a humid environment. The laser marking machine is a precision instrument, and the internal circuit control is also very precise, which is easily affected by the external voltage. When we use the laser marking machine, we must ensure that the input voltage of the machine is 220 volts. Too low or too high voltage may cause active use to malfunction, so this aspect also needs attention. The switching sequence of the laser marking machine is very simple. We only need to use it according to the normal process and it will hardly cause any problems. The operator of the laser marking machine must undergo professional training before using the machine, so that it can be standardized The use of the machine will not cause unnecessary losses. Good usage habits and careful use and maintenance of the operator will greatly improve the service life and good performance of the machine.