How to use the marking machine and the marking characteristics of the laser marking machine

Author: Correct Pack -Laser Marking Machine Manufacturer

How to use the marking machine. 1. The equipment is used and maintained by special personnel. 2. The operator must be trained by the equipment manufacturer before he can operate.

3. The operator must operate in accordance with the instruction manual to avoid damage to the machine or even personal injury due to misoperation. 4. The equipment should be cleaned before shifting or leaving get off work every day, and the moving parts of the equipment (such as guide rails, needle sleeves, etc.) should be refueled and maintained, and the machine head should be observed for loose screws. handover or off work. 5. When the system fails, stop working immediately. With the cooperation of equipment maintenance personnel, judge the failure according to the failure analysis in the instruction manual, and take appropriate measures. If it still cannot be repaired, contact the equipment manufacturer immediately.

6. When loading and unloading the fixture, first turn off the power of the controller, and adjust the printer head to an appropriate height to avoid collision or injury between the printing needle and the fixture. 7. When operating the portable head, it should be handled with care, and the laser marking machine should pay attention to the printing needle not to collide with the ground or other equipment at will. 8. When the environmental conditions do not meet the requirements, please do not force the machine to start up (for example, when the voltage does not meet the requirements, the humidity is too high, or the temperature is too high), and try to reduce the system overload operation time.

Do not change the system structure at will (including computer settings, controller and head wiring or replace it with other products not provided by the equipment manufacturer). Random changes may affect the normal operation of the equipment or even cause damage to the equipment. Fiber laser marking machine can meet the needs of printing a large amount of data on extremely small plastic parts. For example, it can print two-dimensional barcodes that require more precision and higher definition. Compared with embossing or jet marking, With stronger market competitiveness, the laser can act on the surface of the material with an extremely thin beam, and the thinnest line width can reach 0.05mm, creating a broad application space for precision processing and adding anti-counterfeiting functions. Part of the material is burned away by laser light energy, so as to show the pattern and text to be etched, so the laser UV laser marking machine is used to make the marking effect on the product with high precision, delicate effect and no flaws. It also has a major feature that the effect is permanent and will not wear out. The marking speed of the laser marking machine can reach up to 8000MM/S, which can meet mass industrial production. Since the use of laser marking machines is to meet the assembly line production , Now the laser marking machine can be equipped with an assembly line workbench to ensure assembly line production.

ABS material is used everywhere in our daily life, the most common one is the electrical casing, because the ABS material is hard, the finished product made by the traditional marking method has a lot of flaws, now we can use the laser marking machine to mark Generally, a semiconductor laser marking machine can be used. The fiber laser marking machine is equipped with imported modules and high-speed galvanometer marking heads, which ensures the high precision of equipment marking, and the laser peak power is high and the pulse is small. It can be well marked on various metal and non-metal materials, and the effect on hard materials such as ABS is very high. Laser marking mechanism of IC automatic laser marking machine:. The laser has high brightness, high directivity, high monochromaticity and high coherence, which is unmatched by ordinary lighting sources. After the laser beam is focused, it can generate thousands of degrees or even tens of thousands of degrees of high temperature at the focal point, making it Possibility to process almost any material.

Laser marking is to use laser beams to engrave permanent marks on the surface of various substances. The effect of marking is to expose deep substances through the evaporation of surface substances, or to cause chemical and physical changes in surface substances through the action of light energy.“carve”There are traces showing the graphics and text to be etched. Laser marking features:. 1) It can process a variety of metal and non-metal materials, especially for marking high hardness, high melting point and brittle materials.

2) It belongs to non-contact processing, does not damage the product, has no tool wear, and has good marking quality. 3) The laser beam is thin, the consumption of processing materials is small, and the processing heat-affected zone is small. 4) High processing efficiency, computer control, easy to realize automation.

Zhuhai Correct Pack is a well-known laser equipment manufacturer in China. It has been focusing on the development and production of laser equipment for 12 years, providing customers with a complete set of laser equipment solutions, and creating cost-effective laser equipment. Main business: UV, co2, fiber laser marking machines, laser radium engraving machines And other cost-effective laser equipment, national service hotline: 400-0098-266https://www.xmslaser.com/.