The characteristics and product differences of laser marking machines


Author: Correct Pack -Laser Marking Machine Manufacturer

The characteristics of using a laser marking machine include those, as follows:. 1. Using laser marking, there is no processing force between the workpiece and the advantages of no contact, no cutting force, and small thermal influence, which ensures the original precision of the workpiece. At the same time, it has a wide range of adaptability to materials. It can be used in Produces very fine marks on the surface of various materials and has very good durability. 2. The laser has good time control and space control. It has a great degree of freedom for the material, shape, size and processing environment of the processing object. It is especially suitable for automatic processing and special surface processing. The processing method is flexible and can also meet Industrial mass production requirements.

3. Laser marking is fine, and the lines can reach the micron level. The marks made by laser marking technology are difficult to imitate and modify, which is very important for the anti-counterfeiting of products. 4. The operation is simple, the use of microcomputer numerical control technology can realize automatic processing, it can be used in the production line for high-speed and high-efficiency processing of parts, and it can be used as a part of the flexible processing system. A few points to note when using a laser marking machine are:.

1. The laser and optical lenses are fragile, and the laser marking machine should be handled with care to avoid vibration. The output of the laser power supply cannot be suspended to prevent breakdown and fire between other electrical appliances. When the laser is working, it cannot be active with the scanning table Contact or collision of beams. 2. When the sliding rod of the scanning table runs unevenly, lubricating oil can be applied to the axle. 3. Environmental requirements, clean and dust-free, keep the surface of the machine clean and tidy, humidity: 30-80%, temperature: 5-40 degrees, optimal ventilation equipment, no strong vibration, no heating elements around.

The price of the laser marking machine is determined not only by the difference in configuration, but also by the power difference. In the current market, it can be roughly divided into: 10W, 20W, 50W, 60W and some high-power fiber optic marking machines, with different power There are different prices, the higher the power, the more expensive the price, what should be paid attention to when buying a laser marking machine in 2018 2, the difference between the price and quality of fiber laser marking machines is also the difference between lasers: fiber laser marking The price of the standard machine varies with different brands of lasers. Generally, the price of fiber laser marking machine produced by imported laser is more expensive than that of laser marking machine using household laser, however, the quality and stability of fiber laser marking using imported laser are very high, 43. For a good laser marking machine, although the choice of laser plays a certain role, the details determine success or failure, and it is often best reflected in the details. Laser Laser engraving technology is one of the largest applications of laser processing. Laser engraving is a marking method that uses a high-energy-density laser to locally irradiate a workpiece to evaporate surface material or cause a chemical reaction that changes color, leaving a permanent mark , laser engraving can produce various characters, symbols and patterns, and the size of the characters can range from millimeters to microns, which has special significance for the anti-counterfeiting of products. The focused ultra-fine laser beam is like a tool, which can remove the surface material of objects point by point .

Its advanced nature is that the marking process is non-contact processing, without mechanical extrusion or mechanical stress, so it will not damage the processing object, the laser after focusing is small in size, the heat-affected area is small, and the processing is fine, so it can complete the process that cannot be achieved by traditional methods , used in laser processing“tool”It is the spot after focusing, no need to add additional equipment and materials, as long as the laser works normally, it can be processed continuously for a long time by the IC automatic laser marking machine, the laser marking machine is fast and low in cost, and the laser processing is automatically controlled by the computer , without human intervention in the production process, what kind of information the laser can mark is only related to the content designed in the computer, as long as the graphic marking system designed in the computer can recognize it, the marking machine can accurately restore the design information to the appropriate Carrier, therefore, the function of the software actually determines the function of the system to a large extent. 1. China's first 3-axis control system, precise 3-axis marking, overturns the traditional 2D marking mode, and realizes various 3D marking modes, such as bevel, ladder, cylinder, cone, spherical surface and any curved surface. 2. The unique self-sensing focusing system of the laser marking machine can automatically identify the surface position of the workpiece and focus quickly to improve processing efficiency.

3. The equipment casing adopts mold technology, which is stronger and better sealed. 4. The unique shutter closing technology complies with European and American safety standards. 5. Adopt imported laser marking machine with high stability and advanced galvanometer scanning technology to ensure high speed, high precision and long life, and ensure that the system meets the requirements of continuous and efficient production.

Zhuhai Correct Pack is a well-known laser equipment manufacturer in China. It has been focusing on the development and production of laser equipment for 12 years, providing customers with a complete set of laser equipment solutions, and creating cost-effective laser equipment. Main business: UV, co2, fiber laser marking machines, laser radium engraving machines And other cost-effective laser equipment, national service hotline: 400-0098-266

Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English