Metal electroprinting marking machine. This is a very economical and exquisite marking method. The technology originated from abroad. It was introduced into the Chinese market by 3 manufacturers in the United States, Germany and Japan about 10 years ago. However, due to reasons such as price and after-sales service, imported brands are currently in the market The domestic market share is extremely small, and some domestic companies have imitated production and sales, but among them, good and bad are mixed. Some manufacturers often produce in the form of family workshops, which cannot guarantee the stability and safety of the machine. Some key consumables are also cut corners. , it is difficult to meet the actual needs of users for mass production. These companies often attract customers with low prices, but once the machines are sold, they cannot fulfill the pre-committed technical support and maintenance services. We often encounter some customers who are greedy to buy cheap. In the end, the production is often delayed, and the laser marking machine needs to be invested again. In fact, because the electroprinting marking machine needs to use templates, marking fluid and other consumables, more than 30% of its value is in after-sales service. If this If the quality and service cannot keep up, the marking machine cannot reflect its practical value. Therefore, it is recommended that customers must fully compare various factors when selecting a manufacturer. Pneumatic marking machine.
The characteristic of this kind of equipment is immediate output and great depth, so it is especially suitable for printing various batch numbers and other labels that need to be changed frequently. It is still dominated by domestic brands. In fact, dot peen marking machines require manufacturers to have very professional numerical control design capabilities, and some manufacturers use unstable numerical control systems in order to reduce costs. Therefore, the product quality of UV laser marking machines is not It is not satisfactory. Once the after-sales service cannot keep up (this kind of equipment has a large weight and volume), customers often complain. The D-17 developed by the product itself adopts the most advanced numerical control system, and the key components insist on adopting lower cost High-quality imported accessories, the products have been successfully applied to many domestic famous automobile production lines, and have withstood the most severe test. laser marking machine. It is mainly composed of laser, vibrating lens and marking card. The marking machine uses fiber laser to produce laser. The beam quality is good. The output center is 1064nm. The life of the whole machine is about 100,000 hours. Compared with other types of laser marking The life of the device is longer, and the electro-optic conversion efficiency is more than 28%. Compared with other types of laser marking machines with a conversion efficiency of 2%-10%, it has a great advantage. The IC automatic laser marking machine has outstanding performance in terms of energy saving and environmental protection.
The reason why the marking machine has these classifications is to classify according to the specific use. It is made to meet the actual use needs. When customers choose, they must not cause poor results in later use because of wrong choices. The phenomenon. 1. When the machine is not working, close the working cabin door to prevent dust from entering the laser. 2. When installing or changing the working place, pay attention to the phase sequence of the power supply so that the pump can work normally.
3. The circuit is in a high voltage state when the machine is working. Non-professionals should not check and repair it when it is turned on to avoid electric shock accidents. 4. If the machine fails, immediately press the emergency stop button and cut off the power supply. 5. When working continuously, it must be connected with circulating water of suitable temperature.
6. Depending on the water quality, the internal circulating cooling water needs to be replaced every 3 to 6 months. Zhuhai Correct Pack is a well-known laser equipment manufacturer in China. It has been focusing on the development and production of laser equipment for 12 years, providing customers with a complete set of laser equipment solutions, and creating cost-effective laser equipment. Main business: UV, co2, fiber laser marking machines, laser radium engraving machines And other cost-effective laser equipment, national service hotline: 400-0098-266https://www.xmslaser.com/.