Author: Correct Pack -Laser Marking Machine Manufacturer
The lettering process of the laser marking machine is very simple. Let's take you step by step to understand the lettering process of the laser marking machine. I hope it can help you understand some problems encountered by the laser marking machine during the lettering process. and some workarounds. 1. First, we enter the laser marking machine software, find the left side of the software working area, and draw a text icon. We click it with the left button of the mouse, and then click the left button in the working area. At this time, the default text text appears. 2. Next, let's see that there is a text box on the lower left of the software, which contains text. We change this text to the text we want, and then select the font we need from the font above. Then click Apply to take effect. 3. Click the H icon on the top of the software, which is the filling function. After entering, check the enable outline, check enable, and then change the line spacing to 0.1 mm, and then change the ring spacing to 0.5 mm. Then click OK. 4. Size setting, we can change the size, X and Y, we change X to the size we want, and Y to the size we want, this is changed proportionally by default, we change wi It will be changed automatically when you change ex, and Y will be changed automatically when you change ex. If this effect is not needed, we can click a small tool next to it to change our X and Y respectively when the lock is unlocked. Then click Apply to take effect. 5. Click the F icon on the top of the text. In this box, you can check bold or snow or arrange the direction horizontally or vertically. You can also change the width and angle of characters, character spacing, and line spacing. If you want to use the arc text, we can check the arc text to set the diameter and matrix angle of the circle. 6. The next step is to set the system parameters. Set different speeds and powers according to different materials. If it is stainless steel, we can set the speed to 800 kilometers, set it to 70, and set the frequency to 20. If it is plastic, we can You can set the speed as one line, the power as 10~30, and the frequency as 20. 7. Click the red light below or press F1 on the keyboard. At this time, we can place our bows and arrows in the red frame position, click Dart or press F2 on the keyboard, and laser marking will start. The above is the lettering process of the laser marking machine introduced to you, and I hope it can help you.